2021-2022 Catalog 
    
    Feb 22, 2024  
2021-2022 Catalog [ARCHIVED CATALOG]

Add to Portfolio (opens a new window)

INDS 221 - Advanced Machine Operations

4 Credit: (1 lecture, 3 lab, 0 clinical) 4 Contact Hours: [INDS 220 ]


This course includes advanced machine operations for milling machine, lathe, surface grinder and drill press. Emphasis is placed on increasing speed and accuracy and gaining confidence in the operation of these machines.
OFFERED: spring semesters

Course Goals/ Objectives/ Competencies:
Goal 1:  Work safely in a machine shop.

  1. Identify unsafe work conditions in a machine shop.
  2. Demonstrate safe work habits in a machine shop.

Goal 2:  Perform detailed measurements.

  1. Read micrometer to 0.0001”.
  2. Read caliper to 0.001.”

Goal 3:  Students will choose from the following projects. Number of projects required

will vary based on projects chosen:

  1. Create a 1-2-3 block.
    1. Mill the 1-2-3 block.
    2. Drill the 1-2-3 block.
    3. Grind the 1-2-3 block.
    4. Heat treat the 1-2-3 block.
  2. Create angle templates.
    1. Mill the angle templates.
    2. Grind the angle templates.
    3. Heat treat the angle templates.
  3. Create a precision vise.
    1. Mill the precision vise.
    2. Drill the precision vise.
    3. Grind the precision vise.
    4. Shape the precision vise on the lathe.
    5. Heat treat the precision vise.
  4. Create a vise stop.
    1. Mill the vise stop.
    2. Drill the vise stop.
    3. Heat treat the vice stop.
  5. Create an angle plate.
    1. Mill the angle plate.
    2. Drill the angle plate.
    3. Grind the angle plate.
    4. Heat treat the angle plate.
  6. Create a center punch.
    1. Grind the center punch.
    2. Shape the center punch on the lathe.
    3. Heat treat the center punch.
  7. Create a crosspeen hammer.
    1. Mill the crosspeen hammer.
    2. Drill the crosspeen hammer.
    3. Grind the crosspeen hammer.
    4. Shape the crosspeen hammer on the lathe.
    5. Heat treat the crosspeen hammer.
  8. Create a tap wrench.
    1. Mill the tap wrench.
    2. Drill the tap wrench.
    3. Grind the tap wrench.
    4. Shape the tap wrench on the lathe.
  9. Create a V block.
    1. Mill the V block.
    2. Drill the V block.
    3. Grind the V block.
    4. Heat treat the V block.
  10. Create a slide hammer (lathe).
    1. Form the tap wrench on the lathe.



Add to Portfolio (opens a new window)